What is a good capital adequacy ratio?
There is no single "good" number, but there are published minimums. Under Basel III a bank must keep total capital of at least 8% of risk-weighted assets, and a ratio is only comfortable if it sits well above all the requirements that apply, including buffers.
Minimum capital adequacy ratios by regime
| Regime | CET1 | Tier 1 | Total capital (CAR) | Buffer on top | Source |
|---|---|---|---|---|---|
| Basel Framework (BCBS) | 4.5% | 6% | 8% | 2.5% CET1 conservation buffer; countercyclical buffer 0 to 2.5% | RBC20.1, RBC30 |
| India (RBI) | 5.5% | 7% | 9% | 2.5% CET1 conservation buffer, so 11.5% total | RBI Master Circular 2014, para 4.1 and 4.2.2 |
| United States: "well capitalized" (prompt corrective action) | 6.5% | 8% | 10% | Also a leverage ratio of 5% | 12 CFR 6.4(b)(1), 12 CFR 208.43(b)(1) |
| United States: "adequately capitalized" | 4.5% | 6% | 8% | Also a leverage ratio of 4% | 12 CFR 6.4(b)(2), 12 CFR 208.43(b)(2) |
All figures are percentages of risk-weighted assets, taken from the sources listed at the bottom of this page on 27 October 2026. The US thresholds are categories for prompt corrective action, not a single required ratio, and apply to the banks each rule covers (national banks and Federal savings associations in 12 CFR 6.4; state member banks in 12 CFR 208.43); they also require that the bank is not subject to a written agreement, order or directive to meet a specific capital level. The UK, EU and other jurisdictions have their own rules and are not listed here.
How the Basel numbers fit together
RBC20.1 requires CET1 of at least 4.5% of RWA, Tier 1 of at least 6% and total capital of at least 8%, at all times. A capital conservation buffer of 2.5%, made up of CET1, sits above the regulatory minimum (RBC30.2). Banks can also face a countercyclical buffer that varies between zero and 2.5% of RWA (RBC30) and, for global systemically important banks, a higher loss absorbency requirement that must be met with CET1 only (RBC40.1).
Adding the 2.5% conservation buffer to the 8% total capital minimum gives 10.5% of RWA, which is the "with buffer" reference level used in the examples on this site. Countercyclical and systemic buffers would add to it. In the calculator above, try a ratio just below 10.5% to see the effect.
How to read a bank's capital adequacy ratio
- Compare with the right requirement. Use the minimum and buffers your supervisor applies, not only 8%.
- Look at the cushion. The gap between the reported ratio and the requirement matters more than the ratio alone.
- Check the mix. A total ratio built mostly from Tier 2 is weaker than one built from CET1, because Tier 2 is gone-concern capital (CAP10.16).
- Look at the denominator. Two banks with the same capital can have different ratios if they measure RWA differently.
- Use the bank's own disclosure. Banks publish their ratios in regulatory filings; use those, not a calculator, for any decision.
Worked examples
| Example (hypothetical) | Tier 1 | Tier 2 | RWA | CAR | vs 8% | vs 10.5% |
|---|---|---|---|---|---|---|
| Bank A | 140 | 30 | 1,000 | 17.00% | Meets (+90) | Meets (+65) |
| Bank B | 90 | 20 | 1,200 | 9.17% | Meets (+14) | Below (-16) |
| Bank C | 600 | 150 | 5,000 | 15.00% | Meets (+350) | Meets (+225) |
| Bank D | 52 | 8 | 800 | 7.50% | Below (-4) | Below (-24) |
Hypothetical figures in one currency unit. "vs" columns show the capital above (+) or below (-) the stated level. These numbers are produced by the same code the calculator uses.
Bank A (17.00%) clears both reference levels. Bank B (9.17%) is above the 8% minimum but below 10.5%, so it would not reach the 10.5% reference level. Bank D (7.50%) is below the 8% minimum. Compute your own with the capital adequacy ratio calculator or see the formula.
Frequently asked questions
What is a good capital adequacy ratio?
There is no single number. A ratio is "good" when it is comfortably above every requirement that applies to the bank: the Basel minimum total capital ratio of 8% of RWA, the 2.5% CET1 conservation buffer, any countercyclical or systemic buffers, and any higher level set by the bank's own supervisor. In India the minimum CRAR is 9%.
What is the capital adequacy ratio for 2026?
The Basel Framework minimums are unchanged in structure: 4.5% CET1, 6% Tier 1 and 8% total capital, plus a 2.5% CET1 conservation buffer. National rules vary, so check your regulator. India (RBI) sets 9% total capital; US agencies define "well capitalized" at 10% total risk-based capital.
What is a good CRAR?
The RBI minimum is a CRAR of 9% on an ongoing basis, with an additional 2.5% capital conservation buffer, which takes the requirement to 11.5% of RWA. RBI can set higher levels for individual banks. See CRAR and RBI norms.
What is the best or ideal capital adequacy ratio?
No regulator publishes an "ideal" ratio. Higher means a larger loss-absorbing cushion, but very high capital can lower return on equity, so banks target a level above requirements that suits their risk and strategy.
Is a higher capital adequacy ratio always better?
It indicates a stronger capital buffer, but the ratio depends on how RWA are measured. Compare it with the CET1 and leverage ratios and with the bank's own disclosures.
What is the difference between the CAR and the CET1 ratio?
CAR (total capital ratio) counts CET1, Additional Tier 1 and Tier 2 capital. The CET1 ratio counts only common equity capital. The Basel minimums are 8% and 4.5% respectively.
Last updated 27 October 2026.
Sources
- Basel Committee on Banking Supervision, Basel Framework, RBC20 Calculation of minimum risk-based capital requirements. Fetched 27 October 2026.
- Basel Framework, RBC30 Buffers above the regulatory minimum. Fetched 27 October 2026.
- Basel Framework, RBC40 Systemically important bank buffers. Fetched 27 October 2026.
- Basel Framework, CAP10 Definition of eligible capital. Fetched 27 October 2026.
- Reserve Bank of India, Master Circular on Basel III Capital Regulations, 1 July 2014 (RBI/2014-15/103), paragraphs 4.1 and 4.2.2. Fetched 27 October 2026.
- Reserve Bank of India, Commercial Banks - Prudential Norms on Capital Adequacy Directions, 2025 (RBI/DOR/2025-26/151; page shows "Updated as on October 07, 2026"). Fetched 27 October 2026.
- 12 CFR 6.4, Capital measures and capital category definitions (OCC prompt corrective action), eCFR. Fetched 27 October 2026.
- 12 CFR 208.43, Capital measures and capital category definitions (Federal Reserve Regulation H), eCFR. Fetched 27 October 2026.
Related guides and calculators
- Bank capital stack explained: Pillar 1, Pillar 2A, buffers, MREL and leverage
- Bank capital buffers: CCB, CCyB and G-SIB explained
- Bank capital stress tests explained, with the Bank of England 2025 results
- Capital ratios worked example with a hypothetical bank
- Capital needed for a target ratio
- Basel III standardised approach risk weights by exposure class
- Risk-weighted assets calculator
- CET1 ratio calculator
- Tier 1 capital ratio calculator
- Leverage ratio calculator
- Basel III minimum capital requirements
- Capital adequacy ratio FAQ
- Published bank capital ratios: FDIC, ECB, Fed and HSBC figures