Home › Capital ratios worked example

Capital ratios worked example: a hypothetical bank

Follow one invented bank from its exposures to its CET1, Tier 1, total capital and leverage ratios. Example Bank has RWA of 15,000 and CET1 of 1,800, so its CET1 ratio is 1,800 ÷ 15,000 = 12%.

Hypothetical bank. Example Bank is not a real bank. Every figure on this page is invented to show the arithmetic, in one currency unit. It is not a forecast and says nothing about any real institution.

Step 1: exposures and risk weights give credit RWA

Each line is multiplied by a risk weight from the Basel standardised approach, using the tables on the risk weights by exposure class page. Off-balance sheet items are first converted with a credit conversion factor (CCF). Liabilities and funding are not shown because they do not enter RWA.

ExposureAmountCCFRisk weightRWAReference
Cash and allocated gold1,200100%0%0CRE20.110(1)
Government bonds, rated AAA to AA-3,000100%0%0CRE20.7, Table 1
Placements with banks, rated A+ to A- (base weight)1,500100%30%450CRE20.18, Table 6
Residential mortgages, LTV above 60% to 80%9,000100%30%2,700CRE20.82, Table 11
Residential mortgages, LTV above 80% to 90%1,500100%40%600CRE20.82, Table 11
Credit cards and personal loans (regulatory retail)2,500100%75%1,875CRE20.68(1)
Corporate loans, rated BBB+ to BBB-2,400100%75%1,800CRE20.42 and CRE20.43, Table 10
Corporate loans, unrated2,600100%100%2,600CRE20.42 and CRE20.43, Table 10
SME corporate loans, unrated800100%85%680CRE20.47
Income-producing commercial property loans, LTV up to 60%600100%70%420CRE20.87, Table 14
Equity holdings100100%250%250CRE20.57
Defaulted loans, net of provisions (provisions under 20%)150100%150%225CRE20.106(1)
Other assets650100%100%650CRE20.110
Undrawn corporate commitments, rated BBB+ to BBB-2,00040%75%600CRE20.42 and CRE20.43, Table 10, CRE20.98
Retail card limits the bank can cancel unconditionally3,00010%75%225CRE20.68(1), CRE20.100
Credit RWA26,000 on balance sheet13,075

On-balance sheet assets total 26,000, so the average risk weight is well below 100%: mortgages and sovereign bonds carry low weights, which is why RWA is much smaller than total assets.

Step 2: add market and operational RWA

Credit RWA of 13,075 plus market risk RWA of 300 plus operational risk RWA of 1,625 gives total RWA of 15,000. The market and operational figures are assumed inputs for this example; the page does not calculate them. Example Bank is assumed to use standardised approaches throughout, so the 72.5% output floor in RBC20.4 (72.5% of the standardised sum) does not set a higher figure.

Step 3: regulatory capital

ComponentAmount
Common Equity Tier 1 (CET1)1,800
Additional Tier 1 (AT1)150
Tier 1 (CET1 + AT1)1,950
Tier 2375
Total capital (Tier 1 + Tier 2)2,325

Step 4: the ratios

RatioCalculationResultBasel minimumMinimum + 2.5%Headroom over minimum + 2.5%
CET1 ratio1,800 ÷ 15,00012%4.5%7%5 points (750)
Tier 1 ratio1,950 ÷ 15,00013%6%8.5%4.5 points (675)
Total capital ratio (CAR)2,325 ÷ 15,00015.5%8%10.5%5 points (750)
Leverage ratio1,950 ÷ 27,300 (assumed exposure measure)7.14%3%Not applicable4.14 points over 3%

Minimums are from RBC20.1 (4.5%, 6%, 8%) and LEV20.7 (3%); the conservation buffer is 2.5% of RWA in CET1 (RBC30.2). The leverage exposure measure of 27,300 is an assumed input: LEV30 explains how a real bank measures it.

Hypothetical bank ratios against the Basel minimum and conservation bufferFor each of CET1, Tier 1 and total capital, a bar shows the minimum, the 2.5 percent conservation buffer and the headroom above both, ending at the bank's hypothetical ratio.0%4%8%12%16%CET112%Tier 113%Total capital15.5%Basel minimumConservation buffer 2.5%Headroom
Example Bank (hypothetical): each bar runs to the bank's ratio. The 8.5% and 10.5% totals are minimum plus 2.5%, our arithmetic.

How much CET1 is left for the buffer?

CET1 is used first to meet the Tier 1 and total capital minimums (footnote 1 to RBC30.2). Example Bank's AT1 is 1% of RWA and its Tier 2 is 2.5%, so the CET1 needed to meet all three minimums is the highest of 4.5%, 6% - 1% = 5%, and 8% - 1% - 2.5% = 4.5%, which is 5%. CET1 of 12% leaves 7% of RWA to cover the 2.5% conservation buffer, so it is covered with 4.5 points to spare. This is the same method as the advanced calculator.

Step 5: what changes the ratios

ScenarioRWACET1Tier 1TotalAssumption
Base case15,00012%13%15.5%As above
Lending grows: 1,000 of new unrated corporate loans16,00011.25%12.19%14.53%RWA rises by 1,000 × 100%; capital unchanged
Loss of 300 with RWA held constant15,00010%11%13.5%Simplified: no tax effect, RWA unchanged
Bank issues 150 of new CET115,00013%14%16.5%RWA unchanged

New lending raises the denominator and lowers every ratio; a loss lowers the numerator. Issuing capital works in the opposite direction.

Step 6: solve for a target

Suppose Example Bank's management wants a CET1 ratio of 13%. Capital needed = 13% × 15,000 = 1,950, so it must add 150 of CET1 if RWA stays at 15,000. Alternatively, suppose it wants to keep CET1 at 11% while growing. Maximum RWA = 1,800 ÷ 11% = 16,363.64, which leaves room to add 1,363.64 of RWA (9.09% growth). The target ratio solver does this for any bank, and you can enter Example Bank's figures yourself.

Try it yourself

Frequently asked questions

Is Example Bank a real bank?

No. Example Bank is invented for this page. Its exposures, capital and ratios are hypothetical and do not describe any real institution.

How is the CET1 ratio calculated in this example?

CET1 capital of 1,800 divided by risk-weighted assets of 15,000 gives 12%.

Why does Example Bank have more total capital than the minimum?

Its total capital ratio of 15.5% is above the 8% Basel minimum (RBC20.1) and above the 10.5% that adds the 2.5% conservation buffer (RBC30.2). Banks usually keep a margin above requirements.

Does the leverage ratio use risk weights?

No. It divides Tier 1 capital by an exposure measure with no risk weights, and the Basel minimum is 3% (LEV20.4, LEV20.7). In this example the exposure measure of 27,300 is an assumed input.

Sources: Basel Committee on Banking Supervision, Basel Framework, bis.org: CRE20 Standardised approach: individual exposures (in force 1 January 2023, last updated 10 June 2025) for risk weights and CCFs; RBC20 Calculation of minimum risk-based capital requirements (RBC20.1, RBC20.4); RBC30 Buffers above the regulatory minimum (RBC30.2, RBC30.12); LEV20 Leverage ratio: calculation (LEV20.4, LEV20.7). Read and last checked 15 November 2026. All Example Bank figures are invented.

Related guides and calculators