Home › Capital needed for a target ratio

Capital needed for a target ratio: solve for capital or RWA

Required capital = target ratio × risk-weighted assets (RWA). Maximum RWA = capital ÷ target ratio. The solver works both ways for the CET1, Tier 1, total capital (CAR) and leverage ratios, and shows how much capital to add or RWA to cut to close a gap.

Required capital = target ratio × RWA, for example 10% × 1,000 = 100. Maximum RWA = capital ÷ target ratio, for example 85 ÷ 10% = 850. Turn on JavaScript to use the solver.

Educational information, not financial advice. This page explains how regulatory capital ratios are calculated and quotes published minimums. It is not regulatory, legal, investment or financial advice, and it does not tell you what any particular bank must hold. Your own supervisor's current rules apply. Always check the source linked on the page.

The formulas

QuestionFormulaExample (CET1, target 10%)
Capital needed for the targettarget × RWA10% × 1,000 = 100
Maximum RWA for the capital you holdcapital ÷ target85 ÷ 10% = 850
Capital to add (RWA unchanged)target × RWA - capital, if positive100 - 85 = 15
RWA to cut (capital unchanged)RWA - capital ÷ target, if positive1,000 - 850 = 150
Leverage ratioSame formulas with the leverage exposure measure in place of RWASee example 5

Worked examples

All figures are hypothetical and in one currency unit. They are produced by the same code as the solver above, and "Fill example" in the solver reproduces examples 1, 2, 3 and 5 for the matching ratio.

RatioTargetCapitalRWA or exposureCapital neededMaximum RWA or exposureResult
CET1 ratio10% (7% plus a 3 point margin)851,000100850Add 15 of capital, or cut RWA by 150 to 850
Tier 1 ratio8.5% (6% plus 2.5%)801,00085941.18Add 5 of capital, or cut RWA by 58.82 to 941.18
Total capital ratio (CAR)10.5% (8% plus 2.5%)951,000105904.76Add 10 of capital, or cut RWA by 95.24 to 904.76
CET1 ratio7% (4.5% plus 2.5%)1201,5001051,714.29Surplus 15; room to add 214.29 (14.29%) of RWA
Leverage ratio3% minimum1405,0001504,666.67Add 10 of capital, or cut exposure measure by 333.33 to 4,666.67

Example 1 step by step

  1. Target CET1 ratio: 10%. RWA: 1,000. Capital needed = 10% × 1,000 = 100.
  2. Current CET1: 85, so the current ratio is 85 ÷ 1,000 = 8.5%, which is 1.5 percentage points short.
  3. Route 1: add 100 - 85 = 15 of CET1 and keep RWA at 1,000.
  4. Route 2: reduce RWA to 85 ÷ 10% = 850, a cut of 150 (15%), and keep CET1 at 85.
Two ways to close a capital gapStarting CET1 ratio of 8.5% against a target of 10%, and the same target reached by adding capital or by cutting risk-weighted assets.0%4%8%12%Startcapital 85 on RWA 1,0008.5%Route 1: add capitalcapital 100 on RWA 1,00010%Route 2: cut RWAcapital 85 on RWA 85010%Target 10%
Example 1: a CET1 ratio of 8.5% reaches a 10% target by adding 15 of CET1, or by cutting RWA by 150. Hypothetical figures.

Choosing a target

The solver does not decide the target for you. These are the Basel levels it can pre-fill, which you can add to with the extra margin box.

RatioBasel minimumMinimum plus 2.5% conservation bufferReference
CET1 ratio4.5%7%RBC20.1, RBC30.2
Tier 1 ratio6%8.5%RBC20.1, RBC30.2
Total capital ratio (CAR)8%10.5%RBC20.1, RBC30.2
Leverage ratio3%Not added in this toolLEV20.7

Basel sets the minimums for CET1, Tier 1 and total capital at 4.5%, 6% and 8% of RWA (RBC20.1). It adds a capital conservation buffer of 2.5% of RWA made up of CET1 (RBC30.2). Footnote 1 to RBC30.2 says CET1 must first be used to meet the minimum requirements, including the 6% Tier 1 and 8% total capital requirements, before the remainder can contribute to the buffer. That is why the 8.5% and 10.5% sums are shorthand: the buffer itself cannot be met with Additional Tier 1 or Tier 2. A countercyclical buffer that varies between zero and 2.5% of RWA, also met with CET1, can apply on top (RBC30.12); use the extra margin box to include it. Your supervisor can require more.

What the solver assumes

Frequently asked questions

How do I calculate the capital needed for a target capital ratio?

Multiply the target ratio by risk-weighted assets. With RWA of 1,000 and a target CET1 ratio of 10%, the capital needed is 100. Compare it with the capital you hold to find the surplus or shortfall.

How do I find the maximum RWA for a capital ratio target?

Divide your capital by the target ratio. CET1 capital of 120 and a 7% target support RWA of up to 1,714.29.

Why is the Tier 1 target of 8.5% higher than the 6% minimum?

The solver offers the minimum plus the 2.5% capital conservation buffer as a target. The Basel minimum for Tier 1 is 6% (RBC20.1) and the conservation buffer is 2.5% of RWA, met with CET1 (RBC30.2). The 8.5% sum is our arithmetic, not a figure quoted in the standard.

Does the same arithmetic work for the leverage ratio?

Yes. Replace RWA with the leverage exposure measure and use Tier 1 capital. The Basel minimum is 3% (LEV20.7). Tier 1 of 140 against a target of 3% supports an exposure measure of up to 4,666.67.

Is it better to raise capital or cut RWA?

On paper the two routes close the same gap, and the solver shows both. In practice they differ in cost, timing and business impact, and banks often combine them. This site does not give advice on which to choose.

Sources: Basel Committee on Banking Supervision, Basel Framework, bis.org: RBC20 Calculation of minimum risk-based capital requirements (RBC20.1, RBC20.4); RBC30 Buffers above the regulatory minimum (RBC30.2, RBC30.12); LEV20 Leverage ratio: calculation (LEV20.4, LEV20.7). Read 15 November 2026. A later version of RBC30 effective 1 January 2027 was compared: it changes the wording on which trading-book capital charges count towards the countercyclical buffer weighting, not the 2.5% conservation buffer or the zero to 2.5% countercyclical range. Last checked 15 November 2026.

Related guides and calculators