Basel III standardised approach risk weights by exposure class
Under the Basel III standardised approach, credit risk-weighted assets = exposure × risk weight. The weight depends on the exposure class and, for many classes, on a rating or a loan-to-value band: cash and AAA to AA- sovereigns carry 0%, regulatory retail 75%, unrated corporates 100% and defaulted exposures up to 150%. The tables below follow Basel Framework CRE20 paragraph by paragraph.
- Calculator
- Sovereigns and banks
- Corporates
- Retail
- Real estate
- Equity and other
- Off-balance sheet
- What is not covered
Standardised RWA calculator (illustrative)
How the standardised approach works
- RWA = exposure × risk weight. Exposures are risk-weighted net of specific provisions, including partial write-offs (CRE20.1).
- Ratings. In jurisdictions that allow external ratings for regulatory purposes, banks may use ratings from eligible external credit assessment institutions as the starting point (CRE20.1). Where a bank's due diligence shows higher risk than the rating implies, it must assign a weight at least one bucket higher, and never a lower one (CRE20.20 for banks, CRE20.42 for corporates).
- Off-balance sheet items are converted to credit exposure equivalents with credit conversion factors first (CRE20.94).
- Alternatives. Banks can instead use the internal ratings-based approach with supervisory approval (CRE20.1, CRE20.2), subject to the output floor in RBC20.4.
Sovereigns, public sector entities, development banks and banks
Sovereigns and central banks
| External rating | AAA to AA- | A+ to A- | BBB+ to BBB- | BB+ to B- | Below B- | Unrated |
|---|---|---|---|---|---|---|
| Risk weight | 0% | 20% | 50% | 100% | 150% | 100% |
CRE20.7, Table 1
| Category | Risk weight | Reference |
|---|---|---|
| BIS, IMF, ECB, EU, ESM or EFSF (may receive 0%) | 0% | CRE20.10 |
At national discretion a lower weight may apply to a bank's exposures to its own sovereign or central bank in domestic currency funded in that currency (CRE20.8). Supervisors may recognise export credit agency scores instead of ratings (CRE20.9).
Sovereigns: export credit agency (ECA) risk scores
| ECA risk score | 0 to 1 | 2 | 3 | 4 to 6 | 7 |
|---|---|---|---|---|---|
| Risk weight | 0% | 20% | 50% | 100% | 150% |
CRE20.9, Table 2
Domestic PSEs, option 1 (based on the sovereign rating)
| External rating of the sovereign | AAA to AA- | A+ to A- | BBB+ to BBB- | BB+ to B- | Below B- | Unrated |
|---|---|---|---|---|---|---|
| Risk weight | 20% | 50% | 100% | 100% | 150% | 100% |
CRE20.11, Table 3
Domestic PSEs, option 2 (based on the PSE rating)
| External rating of the PSE | AAA to AA- | A+ to A- | BBB+ to BBB- | BB+ to B- | Below B- | Unrated |
|---|---|---|---|---|---|---|
| Risk weight | 20% | 50% | 50% | 100% | 150% | 50% |
CRE20.11, Table 4
Exposures to domestic public sector entities are risk-weighted at national discretion under either option, and some may be treated as sovereign exposures (CRE20.11, CRE20.12).
Multilateral development banks
| Category | Risk weight | Reference |
|---|---|---|
| Eligible MDB on the 0% list | 0% | CRE20.14 |
MDBs on the 0% list must meet the eligibility criteria in CRE20.14. All other MDBs use the rating table; where external ratings are not allowed, 50% applies (CRE20.15).
Other multilateral development banks (MDBs)
| External rating | AAA to AA- | A+ to A- | BBB+ to BBB- | BB+ to B- | Below B- | Unrated |
|---|---|---|---|---|---|---|
| Base risk weight | 20% | 30% | 50% | 100% | 150% | 50% |
CRE20.15, Table 5
Banks: External Credit Risk Assessment Approach (ECRA, rated)
| External rating | AAA to AA- | A+ to A- | BBB+ to BBB- | BB+ to B- | Below B- |
|---|---|---|---|---|---|
| Base risk weight | 20% | 30% | 50% | 100% | 150% |
| Short-term exposures | 20% | 20% | 20% | 50% | 150% |
CRE20.18, Table 6
Short-term exposures are those with an original maturity of three months or less, or six months or less where they arise from the movement of goods across borders (CRE20.19). Securities firms and other financial institutions subject to equivalent prudential standards are treated as banks (CRE20.40).
Banks: Standardised Credit Risk Assessment Approach (SCRA, unrated or no external ratings)
| Credit risk assessment | Grade A | Grade B | Grade C |
|---|---|---|---|
| Base risk weight | 40% | 75% | 150% |
| Short-term exposures | 20% | 50% | 150% |
CRE20.21, Table 7
| Category | Risk weight | Reference |
|---|---|---|
| Unrated bank, Grade A, CET1 ratio at least 14% and Tier 1 leverage ratio at least 5% | 30% | CRE20.21 footnote 15 |
Covered bonds
Covered bonds that meet the eligibility, cover pool and disclosure conditions in CRE20.34 to CRE20.37 take the weights below; otherwise they are treated as other exposures.
Covered bonds with an issue-specific rating
| Issue-specific rating | AAA to AA- | A+ to A- | BBB+ to BBB- | BB+ to B- | Below B- |
|---|---|---|---|---|---|
| Base risk weight | 10% | 20% | 20% | 50% | 100% |
CRE20.38, Table 8
Unrated covered bonds (by the issuing bank's risk weight)
| Risk weight of the issuing bank | 20% | 30% | 40% | 50% | 75% | 100% | 150% |
|---|---|---|---|---|---|---|---|
| Covered bond risk weight | 10% | 15% | 20% | 25% | 35% | 50% | 100% |
CRE20.38, Table 9
Corporates and specialised lending
Corporates where external ratings are used
| External rating | AAA to AA- | A+ to A- | BBB+ to BBB- | BB+ to BB- | Below BB- | Unrated |
|---|---|---|---|---|---|---|
| Base risk weight | 20% | 50% | 75% | 100% | 150% | 100% |
CRE20.42 and CRE20.43, Table 10
| Category | Risk weight | Reference |
|---|---|---|
| Corporate, no external ratings allowed, "investment grade" | 65% | CRE20.46 |
| Corporate, no external ratings allowed, other | 100% | CRE20.44 |
| Corporate SME (sales up to EUR 50 million), unrated or no ratings allowed | 85% | CRE20.47 |
Corporate SMEs are corporate exposures where the consolidated group's reported annual sales are EUR 50 million or less, although supervisors may use a more conservative definition (CRE20.47).
Specialised lending without an issue-specific rating
| Category | Risk weight | Reference |
|---|---|---|
| Object finance or commodities finance (no issue rating) | 100% | CRE20.51(1) |
| Project finance, pre-operational phase | 130% | CRE20.51(2) |
| Project finance, operational phase | 100% | CRE20.51(2) |
| Project finance, operational phase, high quality | 80% | CRE20.51(2), CRE20.52 |
Where an issue-specific external rating exists and ratings are allowed, Table 10 applies instead (CRE20.50).
Retail
| Category | Risk weight | Reference |
|---|---|---|
| Regulatory retail, not a transactor | 75% | CRE20.68(1) |
| Regulatory retail, transactor | 45% | CRE20.68(2) |
| Other retail | 100% | CRE20.68(3) |
Regulatory retail exposures must meet a product criterion, an exposure limit of EUR 1 million per counterparty and a granularity criterion of 0.2% of the regulatory retail portfolio unless supervisors set another method (CRE20.65). Transactors are card or charge card obligors who repaid the balance in full at each scheduled date for the previous 12 months, or overdraft users with no drawdown in 12 months (CRE20.66).
Real estate
Regulatory residential real estate, not materially dependent on property cash flows (whole loan approach)
| Loan-to-value (LTV) | LTV up to 50% | LTV above 50% to 60% | LTV above 60% to 80% | LTV above 80% to 90% | LTV above 90% to 100% | LTV above 100% |
|---|---|---|---|---|---|---|
| Risk weight | 20% | 25% | 30% | 40% | 50% | 70% |
CRE20.82, Table 11
Jurisdictions may instead use loan splitting: 20% on the part of the exposure up to 55% of the property value and the counterparty's risk weight on the rest (CRE20.83). The weights apply only to exposures that meet the "regulatory real estate" requirements in CRE20.71, and supervisors may require higher weights (CRE20.72).
Regulatory residential real estate, materially dependent on property cash flows
| Loan-to-value (LTV) | LTV up to 50% | LTV above 50% to 60% | LTV above 60% to 80% | LTV above 80% to 90% | LTV above 90% to 100% | LTV above 100% |
|---|---|---|---|---|---|---|
| Risk weight | 30% | 35% | 45% | 60% | 75% | 105% |
CRE20.84, Table 12
Regulatory commercial real estate, not materially dependent on property cash flows (whole loan approach)
| Loan-to-value (LTV) | LTV up to 60% | LTV above 60% |
|---|---|---|
| Risk weight | Lower of 60% and the counterparty risk weight | Counterparty risk weight |
CRE20.85, Table 13
Regulatory commercial real estate, materially dependent on property cash flows (whole loan approach)
| Loan-to-value (LTV) | LTV up to 60% | LTV above 60% to 80% | LTV above 80% |
|---|---|---|---|
| Risk weight | 70% | 90% | 110% |
CRE20.87, Table 14
Other real estate and land development
| Category | Risk weight | Reference |
|---|---|---|
| Other real estate, not materially dependent, individual | 75% | CRE20.89(1) |
| Other real estate, not materially dependent, SME | 85% | CRE20.89(1) |
| Other real estate, materially dependent on property cash flows | 150% | CRE20.89(2) |
| Land acquisition, development and construction (ADC) | 150% | CRE20.90 |
| Residential ADC meeting the CRE20.91 criteria | 100% | CRE20.91 |
For other real estate not materially dependent on property cash flows, exposures to other counterparties take the weight of an unsecured exposure to that counterparty (CRE20.89(1)). Unhedged retail and residential real estate exposures to individuals, where the lending currency differs from the currency of the borrower's income, get a 1.5 times multiplier on the applicable weight, capped at 150% (CRE20.92).
Equity, subordinated debt, defaulted exposures and other assets
| Category | Risk weight | Reference |
|---|---|---|
| Equity holding (not speculative unlisted) | 250% | CRE20.57 |
| Speculative unlisted equity | 400% | CRE20.57, CRE20.58 |
| Equity under national legislated programmes (national discretion) | 100% | CRE20.59 |
| Subordinated debt and capital instruments other than equity | 150% | CRE20.60 |
| Significant commercial entity investment above the materiality thresholds | 1,250% | CRE20.62 |
| Threshold deduction items not deducted (significant investments, MSRs, temporary-difference DTAs) | 250% | CRE20.109 |
The 100% treatment for legislated programmes is limited to an aggregate of 10% of the bank's total capital (CRE20.59). The materiality thresholds for significant commercial entity investments are 15% of capital for an individual investment and 60% for the aggregate (CRE20.61).
Defaulted exposures
| Category | Risk weight | Reference |
|---|---|---|
| Defaulted, specific provisions below 20% of the outstanding amount | 150% | CRE20.106(1) |
| Defaulted, specific provisions at least 20% of the outstanding amount | 100% | CRE20.106(2) |
| Defaulted, provisions at least 50% (national discretion) | 50% | CRE20.106 footnote 46 |
| Defaulted residential real estate, not materially dependent on property cash flows | 100% | CRE20.107 |
A defaulted exposure is one that is past due for more than 90 days or is an exposure to a defaulted borrower (CRE20.104). The unsecured portion is risk-weighted net of specific provisions and partial write-offs (CRE20.106).
Other assets
| Category | Risk weight | Reference |
|---|---|---|
| Other assets: standard risk weight | 100% | CRE20.110 |
| Cash held at the bank or in transit; allocated gold bullion backed by gold liabilities | 0% | CRE20.110(1) |
| Cash items in the process of collection | 20% | CRE20.110(2) |
Off-balance sheet items: credit conversion factors
| Item | CCF | Reference |
|---|---|---|
| Direct credit substitutes, repo-style items, forward asset purchases | 100% | CRE20.95 |
| Note issuance and revolving underwriting facilities; transaction-related contingents | 50% | CRE20.96, CRE20.97 |
| Commitments (default) | 40% | CRE20.98 |
| Short-term self-liquidating trade letters of credit | 20% | CRE20.99 |
| Commitments unconditionally cancellable by the bank | 10% | CRE20.100 |
Where there is an undertaking to provide a commitment on an off-balance sheet item, the lower of the two applicable CCFs is used (CRE20.101). Worked example: an undrawn commitment of 1,000 to a corporate rated BBB+ to BBB- converts to 1,000 × 40% = 400 and is then weighted at 75%, giving RWA of 300.
What is not covered on this page
- The exposure amount for derivatives and securities financing transactions (CRE20.102 sends these to CRE50 to CRE54).
- Credit risk mitigation (CRE22), securitisation (CRE40 to CRE45), equity investments in funds (CRE60), central counterparties (CRE54) and unsettled transactions (CRE70) (CRE20.3).
- The internal ratings-based approach (CRE30 to CRE36), market risk and operational risk RWA, and the 72.5% output floor (RBC20.4).
- National implementations on this page. The EU CRR, UK PRA Rulebook and US 12 CFR 217 are compared with Basel on a separate page; Indian (RBI) risk weights are not stated.
Version note
This page follows the version of CRE20 in force from 1 January 2023, last updated 10 June 2025. The Basel Framework also publishes a version effective 1 January 2028. We compared the two on 15 November 2026: the only difference found is in CRE20.48, where specialised lending is described as having "some or all" of the listed characteristics today and "all" of them in the 2028 version. No risk weight in this page changes.
Frequently asked questions
What is a risk weight?
A percentage applied to an exposure to turn it into risk-weighted assets. Under the Basel standardised approach, risk-weighted assets are the product of the standardised risk weights and the exposure amount, with exposures taken net of specific provisions (CRE20.1).
What risk weight does cash get under Basel III?
Cash owned and held at the bank or in transit has a 0% risk weight, and cash items in the process of collection have 20% (CRE20.110).
What risk weight does a residential mortgage get?
For a regulatory residential real estate exposure that is not materially dependent on property cash flows, the whole loan approach gives 20% at loan-to-value up to 50% rising to 70% above 100% (CRE20.82, Table 11). For example, LTV above 60% to 80% is 30%.
What is a credit conversion factor?
A percentage that turns an off-balance sheet item into a credit exposure equivalent before the risk weight is applied. For example, commitments have a 40% CCF unless they qualify for a lower one (CRE20.98), and commitments that the bank can cancel unconditionally have 10% (CRE20.100).
Are these the risk weights my bank must use?
Not necessarily. These are the Basel Committee standard. Jurisdictions implement it in their own rules, use national discretions, and some do not allow external ratings for regulatory purposes. Check your supervisor's rules. EU, UK and US implementations are compared with Basel on our risk weights compared page; Indian implementations were not read.
Sources: Basel Committee on Banking Supervision, Basel Framework, bis.org: CRE20 Standardised approach: individual exposures (in force 1 January 2023, last updated 10 June 2025); RBC20 Calculation of minimum risk-based capital requirements (RBC20.1, RBC20.4). Paragraph references are to those chapters. Read and last checked 15 November 2026; CRE20 was fetched again on 17 November 2026 (version unchanged: in force 1 January 2023, last updated 10 June 2025) and the risk-weight grids were matched against it.
Related guides and calculators
- Basel 3.1 UK implementation date
- Risk-weighted assets calculator (enter your own weights)
- Capital ratios worked example with a hypothetical bank
- Capital needed for a target ratio
- Capital adequacy ratio formula with a worked example
- Basel III minimum capital requirements
- Capital adequacy ratio FAQ
- Risk weights: EU, UK and US compared with Basel III