Bank capital stress tests explained, with the Bank of England 2025 results
A bank capital stress test projects how a bank's capital ratios would fall in a severe hypothetical downturn, and compares the low point with its regulatory requirements. In the Bank of England's 2025 test the aggregate CET1 ratio of the participating banks fell by 3.5 percentage points to the low point, leaving 3.2 percentage points of headroom to regulatory minima and systemic buffers.
- What a stress test does
- Bank of England 2025 results
- How the results are used
- US stress tests
- Arithmetic illustration
- Not stated
- Sources
What a stress test does
The Bank of England says its stress test is not a forecast. It describes it as a coherent tail risk scenario, designed to be severe and broad enough to allow the Financial Policy Committee (FPC) and the Prudential Regulation Committee (PRC) to assess the resilience of UK banks to a range of adverse shocks (FPC record, December 2025, paragraph 40). The results feed into a view of the resilience of the banking sector and of individual banks.
Bank of England 2025 Bank Capital Stress Test
The FPC met on 1 December 2025 with the PRC to confirm its response to the final results, and published its record on 2 December 2025. Per that record:
- Scenario. A severe global aggregate supply shock, high advanced-economy inflation, higher global interest rates, deep and simultaneous recessions in the UK and global economies with materially higher unemployment, and sharp falls in asset prices (paragraph 39).
- Aggregate result. The aggregate CET1 ratio reduced by 3.5 percentage points to the low point of the test. That left aggregate headroom to regulatory minima and systemic buffers at the low point of 3.2 percentage points of CET1, equivalent to around 60 billion pounds. Most of this headroom arose from banks beginning the test with capital in excess of regulatory minima and buffer requirements (paragraph 41).
- Individual banks. All participating banks and building societies remained above their CET1 risk-weighted and Tier 1 leverage minimum regulatory requirements, and no bank was required to strengthen its capital position as a result of the test (paragraph 43).
- Management actions. As in previous tests, banks' resilience relied in part on cutting dividends, employee variable remuneration and coupons on additional Tier 1 instruments, and on other management actions (paragraph 45).
- IFRS 9. It was the first test since the end of the transitional arrangements for IFRS 9. The Bank had made changes relative to previous tests, and the FPC judged they had avoided an unwarranted increase in capital requirements (paragraphs 46 and 47).
We did not read the starting or low-point CET1 ratio figures or the bank-by-bank table in the Bank's stress test results document, so none are given here.
How the results are used
- The FPC judged that the appropriate benchmark for the system-wide level of Tier 1 capital requirements is around 13% of RWAs, equivalent to a CET1 ratio of around 11%, 1 percentage point lower than its previous benchmark of around 14% (December 2025 record, paragraph 21). It reaffirmed that judgement in July 2026 (FPC paper). The benchmark excludes firm-specific PRA buffers and requirements set by overseas authorities (paragraph 22).
- The PRA buffer is informed by the results of relevant stress testing (Pillar 2A and Pillar 2B).
- The Bank typically assesses banks against a leverage ratio hurdle rate that includes minimum leverage requirements and the additional leverage ratio buffer, and under its leverage proposals would expect to set that hurdle at the minimum plus 40% of risk-weighted systemic buffers (FPC paper, July 2026; see UK leverage ratio requirement).
US stress tests
The Federal Reserve's 2026 stress test results, including aggregate and per-bank figures, are summarised with their source on Published bank capital ratios. We did not read US or EU stress test methodology for this page.
Arithmetic illustration
A hypothetical bank starts with a CET1 ratio of 14.0%. A stress scenario reduces it by 3.5 percentage points to a low point of 10.5%. If its CET1 requirement including buffers is 8.0%, its headroom at the low point is 10.5% - 8.0% = 2.5 percentage points. The figures are invented, apart from the 3.5 point fall, which is the aggregate figure the Bank reported, applied here only to show the sum.
Not stated
- Starting and low-point CET1 ratios and results for each bank in the 2025 test.
- The timing and design of the next Bank of England stress test.
- The European Banking Authority's EU-wide stress test.
- Stress test results for any other jurisdiction beyond those on the published ratios page.
Frequently asked questions
What is a bank capital stress test?
A projection of how a bank's capital ratios would change under a severe hypothetical scenario, compared with its regulatory requirements. The Bank of England describes its test as a tail risk scenario, not a forecast.
What were the Bank of England stress test results in 2025?
The aggregate CET1 ratio fell by 3.5 percentage points to the low point, leaving 3.2 percentage points of headroom (around 60 billion pounds) to regulatory minima and systemic buffers. No bank was required to strengthen its capital position (FPC record, December 2025).
What CET1 ratio do UK banks need?
The FPC's benchmark for system-wide Tier 1 capital requirements is around 13% of RWAs, equivalent to a CET1 ratio of around 11%. Individual banks' requirements differ with their business model, systemic importance and PRA assessment.
Does failing a stress test mean a bank is unsafe?
We do not make statements about any bank's safety. The 2025 record says no participating bank was required to strengthen its capital as a result of the test.
Sources
- Bank of England, Financial Policy Committee Record, December 2025 (published 2 December 2025).
- Bank of England, Financial Policy Committee Record, September 2026 (meeting of 25 September 2026).
- Bank of England, Financial Stability in Focus: The bank capital framework, FPC, July 2026.
Documents read on 19 November 2026.