Pillar 2A and Pillar 2B (the PRA buffer) explained
Pillar 2A is firm-specific capital that the Prudential Regulation Authority (PRA) sets for risks that the Pillar 1 minimums do not fully capture; the PRA buffer, also called Pillar 2B, is a further amount held in addition to the total capital requirement and the combined buffer to absorb losses in a severe stress. Total capital requirement means Pillar 1 plus Pillar 2A.
- Pillar 2A
- How the PRA sets it
- The PRA buffer (Pillar 2B)
- What changes from 1 January 2027
- Arithmetic illustration
- Not stated
- Sources
Pillar 2A
The PRA's capital framework stacks Pillar 1, Pillar 2A, the combined buffer and the PRA buffer. Total capital requirements are the sum of Pillar 1 capital requirements plus Pillar 2A capital requirements (PRA SoP5/15 chapter 9, footnote 32). The combined buffer comprises the capital conservation buffer, the countercyclical buffer, the buffer for global systemically important institutions and, for ring-fenced banks and the largest building societies, the other systemically important institutions (O-SII) buffer (footnote 33). Firms should maintain capital to meet the total capital requirement at all times (para 9.2).
Pillar 2A is set for risks that Pillar 1 does not fully cover. In the PRA's credit risk methodology there are two parts: systematic components for areas where the PRA considers capital requirements are typically underestimated under the Pillar 1 standardised approach (certain exposures to governments, central banks, regional governments or local authorities, and certain retail exposures), and any additional requirement for idiosyncratic credit risk, which is the additional capital required for credit risk in excess of the loss absorbing capacity of Pillar 1 (SoP5/15 paras 2.13B, 2.13C and 2.13J).
How the PRA sets Pillar 2A
The PRA's statement of policy sets out the methodologies it uses to inform the Pillar 2A requirement for credit risk, market risk, operational risk, counterparty credit risk, credit concentration risk, interest rate risk in the banking book, pension obligation risk and group risk, including ring-fenced bank group risk (SoP5/15 para 1.2). The PRA also considers the firm's own assessment in its Internal Capital Adequacy Assessment Process (ICAAP) (para 2.13B), and firms may be asked to submit data to inform it (para 1.4).
One of the systematic methodologies uses a minimum effective risk weight for certain government exposures. The formula in the statement of policy is: sum, over each relevant exposure, of exposure value x (Pillar 2A minimum effective risk weight - Pillar 1 risk weight) x 8%.
The PRA buffer (Pillar 2B)
The PRA buffer is an amount of capital firms should maintain in addition to the total capital requirement and the combined buffer. It absorbs losses that may arise under a severe stress scenario while avoiding duplication with the combined buffers (SoP5/15 para 9.1; also PS9/24 para 1.37). It is set using three assessments (para 9.3):
- the stress impact, an assessment of the capital firms should maintain to withstand a severe stress scenario;
- the risk management and governance assessment, of whether a firm has significant weaknesses; and
- supervisory judgement, an assessment of any other relevant information.
All components of the PRA buffer, including the risk management and governance part, should be met by CET1 capital (para 9.4). The PRA considers that all buffers in the capital framework, including the PRA buffer, can be used as required in times of stress, and says it will be content for firms to rebuild them over a reasonable period (para 9.5).
What changes from 1 January 2027
- Refined methodology retired. PS2/26 (published 20 January 2026) retires the refined methodology to Pillar 2A for all firms from 1 January 2027, aligned with the start of Basel 3.1. From that date the refined methodology no longer applies, because firms will be subject to the Basel 3.1 standardised approach to credit risk (PS2/26 para 1.11). See Basel 3.1 UK implementation date.
- SME and infrastructure lending adjustments. PS9/24 applies firm-specific structural adjustments that reduce Pillar 2A, so that removing the SME and infrastructure support factors from Pillar 1 does not raise overall capital requirements for those exposures (paras 3.87 and 3.92).
- Rebasing. The PRA decided to rebase firms' Day 1 Pillar 2 (both variable parts of Pillar 2A and the PRA buffer) as part of an off-cycle review, and to rebase variable Pillar 2A during the output floor transition so that changes in RWAs from the output floor multiplier do not change Pillar 2A where the relevant risk has not changed (PS9/24 para 5.46).
- Contingent foreign exchange risk. The PRA intends to consider the assessment of contingent FX risk under Pillar 2 as part of Phase 2 of its Pillar 2A review (PS1/26 para 4.11).
Link to the countercyclical buffer
The Bank of England's FPC says that when it raised the neutral UK CCyB rate to 2%, an adjustment was made to Pillar 2A requirements to keep overall regulatory loss-absorbing capacity, defined as the minimum requirement for own funds and eligible liabilities (MREL) plus buffers, broadly unchanged (FPC paper, July 2026). It also notes that Pillar 2A requirements for geographic credit concentration risk, the UK CCyB and O-SII buffers are all calibrated on measures of domestic lending (FPC record, December 2025, paragraph 35).
Arithmetic illustration
Using the formula above with invented numbers: a government exposure of 1,000 with a Pillar 1 risk weight of 0% and a Pillar 2A minimum effective risk weight of 20% adds (20% - 0%) x 1,000 x 8% = 16 of systematic Pillar 2A capital. This only shows how the formula works; it does not say any real exposure has these weights.
Not stated
- The size of Pillar 2A or the PRA buffer for any named bank.
- The share of Pillar 2A that must be met with CET1. A secondary source quotes 56%, but we did not read the primary text, so we do not use it.
- The minimum effective risk weights beyond the two rows we saw in the table, and how they change after 1 January 2027.
- The Pillar 2A rules for non-UK banks.
Frequently asked questions
What is Pillar 2A?
Capital the PRA sets, firm by firm, for risks that the Pillar 1 minimums do not fully capture. Pillar 1 plus Pillar 2A is the total capital requirement (PRA SoP5/15 chapter 9).
What is the PRA buffer or Pillar 2B?
An amount of capital firms should hold in addition to the total capital requirement and the combined buffer, to absorb losses under a severe stress scenario. All of it, including the risk management and governance part, should be met with CET1 (SoP5/15 paras 9.1 and 9.4).
What is the difference between Pillar 2A and Pillar 2B?
Pillar 2A is part of the total capital requirement, which firms must meet at all times. The PRA buffer (Pillar 2B) sits above the total capital requirement and the combined buffer and can be used in stress (SoP5/15 paras 9.2 and 9.5).
What happens to Pillar 2A on 1 January 2027?
The refined methodology to Pillar 2A is retired for all firms from 1 January 2027, when Basel 3.1 starts (PS2/26 para 1.11).
Sources
- PRA Rulebook, SoP5/15 chapter 9, The PRA buffer (page shows Rulebook at 26 May 2024).
- Bank of England, PRA SoP5/15, The PRA's methodologies for setting Pillar 2 capital (version published on the Bank site, includes the PS18/25 confirmation).
- Bank of England, PRA PS2/26, Retiring the refined methodology to Pillar 2A: final, published 20 January 2026.
- Bank of England, PRA PS9/24, Implementation of the Basel 3.1 standards near-final policy statement, part 2.
- Bank of England, PRA PS1/26, Implementation of Basel 3.1: Final rules, published 20 January 2026.
- Bank of England, Financial Stability in Focus: The bank capital framework, FPC, July 2026.
- Bank of England, Financial Policy Committee Record, December 2025 (published 2 December 2025).
Documents read on 19 November 2026. The PRA Rulebook page for chapter 9 displayed 'Rulebook at: 26/05/2024', so check it against the current Rulebook.